2521-XLE 100 PSI 365 GPD 2.5 x 21 Inch HCTI Extra Low Pressure Membrane.
2521-XLE 365 GPD 100 PSI 2.5 x 21 Inch Hydrocomponents HCTI Extra Low Pressure Membrane
-
FREE SHIPPING TO THE CONTINENTAL UNITED STATES
-
1 YEAR MANUFACTURER'S WARRANTY!
-
WE OFFER QUANTITY DISCOUNTS Contact Us for a Quote!
-
WE SHIP INTERNATIONALLY, CONTACT US FOR QUOTE!
-
For Private Labeling Contact Us for a Quote!
Hydrocomponent's membranes are equivalent to all major U.S. brands.
Product Description
REVERSE OSMOSIS EXTRA LOW PRESSURE MEMBRANE SPECIFICATION Reverse Osmosis Elements with Thin-Film Composite Polyamide Membrane Designed to fit a 2.45-2.5 Inch ID Housing or Pressure Vessel.
ALL MATERIALS ARE NSF AND/OR FDA APPROVED WITH THE EXCEPTION OF THE ADHESIVE ON THE OUTER WRAP.
Membrane Performance Table
| Dimensions A (Inches) | Dimensions B (Inches) | Flow (GPD) Nominal | Rejection (%) Min. | Rejection (%) Nominal |
| 21 | 1.2 | 365 +/- 15% |
98 | 99 |
-
1. Permeate flow and salt rejection based on the following test conditions: 500 ppm NaCl, 100psi (), (), pH 7.5 and recovery.
-
2. Flow rates for individual elements may vary .
⚙️ Operating Limits
| Parameter | Specification |
| Membrane Type | Thin-Film Composite |
| Maximum Operating Pressure | 300 pounds per square inch (2.1 Megapascals) |
| Maximum Feed Flow Rate | 3 gallons per minute (1.4 cubic meters per hour) |
| pH Range, Continuous | 7 |
| pH Range, Short Term Cleaning (30 min) | 2 to 11 |
| Maximum Operating Temperature | 113 degrees Fahrenheit (45 degrees Celsius) |
| Maximum Feed Water TDS | 1000 parts per million |
| Maximum Feed Silt Density Index | SDI 5 |
| Free Chlorine Tolerance | Less than 0.1 parts per million |
