{"product_id":"replaces-tw30hp-2526-dupont-filmtec-500-gpd-at-150-psi-2-5-x-26-inch-99-4-rejection-membranes","title":"Replaces TW30HP-2526 DuPont FilmTec 500 GPD at 150 PSI 2.5 x 26 inch 99.4% Rejection Membranes","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eLow-Pressure 2526 Replacement for the FilmTec TW30HP-2526\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis 2.5-inch by 26-inch low-pressure reverse osmosis element from HCTI is a replacement for the FilmTec TW30HP-2526. It matches the following TW30HP-2526 dimensions and ratings: 2.5-inch by 26-inch format, a 6 GPM maximum feed flow, and a 113°F maximum operating temperature.\u003c\/p\u003e\n\u003cp\u003eThe element is rated at 500 GPD with a nominal salt rejection of 99.4% and a 98.0% minimum at a test pressure of 150 PSI. Flow and rejection are rated at 1,500 ppm NaCl, 77°F, pH 7.5, and 15% recovery, and individual elements can vary by up to 15% in flow. It is a thin-film composite polyamide membrane with a tape overwrap, a 2.4-inch outer diameter, and a 0.75-inch permeate tube. It fits a 2.45- to 2.5-inch ID housing or pressure vessel.\u003c\/p\u003e\n\u003cp\u003eIt tolerates operating pressure up to 300 PSI. The continuous pH range is 2 to 11, with cleaning allowed from pH 1 to 12 for up to 30 minutes. Feed water should stay under 1 NTU turbidity and SDI 5, with free chlorine below 0.1 ppm. According to HCTI's data sheet, all materials are NSF and\/or FDA approved, with the exception of the outer wrap and its adhesive. If you are replacing a TW30HP-2526 in an existing 2.5-inch by 26-inch housing, confirm your system runs at or below the 300 PSI limit.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification Table\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIFICATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eDETAILS\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eReplacement For\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eFilmTec TW30HP-2526 (2.5\" x 26\" RO Element)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eManufacturer\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHCTI (Hydrocomponents \u0026amp; Technologies Inc.)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMembrane Type\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eThin-Film Composite Polyamide, Low Pressure RO\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eElement Dimensions\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e2.4\" Diameter x 26\" Length\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eHousing Fit\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e2.45\" – 2.5\" ID Housing or Pressure Vessel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003ePermeate Tube\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.75\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eOuter Wrap\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eTape Overwrap\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003ePermeate Flow Rate\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e500 GPD\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eNominal Salt Rejection\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e99.4%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMinimum Salt Rejection\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e98.0%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eTest Conditions\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1,500 ppm NaCl, 150 psi (10.3 bar), 77°F (25°C), pH 7.5, 15% Recovery\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003ePermeate Flow Variation\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e± 15%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMax Operating Pressure\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e300 psi (20.7 bar)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMax Feed Flow\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e6 GPM (1.4 m³\/h)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMax Operating Temperature\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e113°F (45°C)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003epH Range (Continuous)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e2 – 11\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003epH Range (Cleaning, 30 min)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1 – 12\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMax Feed Water Turbidity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1 NTU\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMax Feed Water SDI\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSDI 5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFree Chlorine Tolerance\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u0026lt; 0.1 ppm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMaterials\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eNSF and\/or FDA Approved, Except Outer Wrap and Adhesive\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"HCTI","offers":[{"title":"Default Title","offer_id":31760902750306,"sku":"","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2555\/0478\/products\/jpeg1_b67178e8-2d42-4449-8b3d-3fc5b3dad483.jpg?v=1592536393","url":"https:\/\/hydrocomponents.us\/products\/replaces-tw30hp-2526-dupont-filmtec-500-gpd-at-150-psi-2-5-x-26-inch-99-4-rejection-membranes","provider":"Hydrocomponents \u0026 Technologies Inc.","version":"1.0","type":"link"}