LG
Replaces BW30-4040 2,500 GPD at 225 PSI 4 x 40 inch 99.6% Rejection Brackish Water LG Membranes
Couldn't load pickup availability
- Found a Better Price? Contact Us, We'll See if We Can Get You a Better Deal!
- Original Authentic Genuine Part!
- For Quantity Discounts Contact Us for a Quote!
- Customers Outside The Contiguous United States, Please Contact Us for a Quote!
- Call: 1 (760) 598-0189
- Email: hctivista@gmail.com
Drop-In 4040 Replacement for the FilmTec BW30-4040
This 4-inch by 40-inch brackish water RO element from LG Water Solutions (LG Chem) is a direct-fit replacement for the FilmTec BW30-4040. It matches the following BW30-4040 dimensions and ratings: 3.9-inch by 40-inch 4040 format, a 0.75-inch permeate tube, a 225 PSI test pressure, a 600 PSI maximum applied pressure, and a 16 GPM maximum feed flow.
The element has 85 square feet of active membrane area and is rated at 2,500 GPD (9.5 m³/d) with a stabilized salt rejection of 99.6% and a 99.3% minimum. It is built on LG's NanoH2O™ thin film nanocomposite (TFN) technology, which puts nanomaterials into the polyamide layer to raise permeability while keeping salt rejection high. A standard 28-mil feed spacer and good fouling resistance support steady output over time.
The element suits light industrial process water and commercial RO systems, and it is certified to NSF/ANSI/CAN Standard 61 for drinking water systems. It operates at temperatures up to 113°F and a continuous pH range of 2 to 11. If you are replacing worn BW30-4040 elements in an existing 4040 vessel, it installs the same way.
Specification Table
|
SPECIFICATION |
DETAILS |
|
Replacement For |
FilmTec BW30-4040 (4" x 40" Brackish Water RO Element) |
|
Manufacturer |
LG Water Solutions (LG Chem) |
|
Element Type |
Brackish Water RO Membrane |
|
Membrane Technology |
Thin Film Nanocomposite (TFN), Spiral Wound |
|
Element Dimensions |
3.9" (100 mm) Diameter x 40" (1,016 mm) Length |
|
Permeate Tube |
0.75" (19 mm) |
|
Active Membrane Area |
85 ft² (7.9 m²) |
|
Permeate Flow Rate |
2,500 GPD (9.5 m³/d) |
|
Stabilized Salt Rejection |
99.6% |
|
Minimum Salt Rejection |
99.3% |
|
Feed Spacer Thickness |
28 mil |
|
Test Conditions |
2,000 ppm NaCl, 225 psi (15.5 bar), 25°C (77°F), pH 7, 15% Recovery |
|
Permeate Flow Variation |
± 20% |
|
Max Applied Pressure |
600 psi (41 bar) |
|
Max Feed Flow |
16 GPM (3.6 m³/h) |
|
Max Pressure Drop (Per Element) |
15 psi (1.0 bar) |
|
Max Operating Temperature |
113°F (45°C) |
|
Max Chlorine Concentration |
< 0.1 ppm |
|
pH Range (Continuous) |
2 – 11 |
|
pH Range (Cleaning) |
2 – 12 |
|
Max Feed Water Turbidity |
1.0 NTU |
|
Max Feed Water SDI (15 min) |
5.0 |
|
Certification |
NSF/ANSI/CAN Standard 61 |
|
Ideal Applications |
Light Industrial Process Water, Commercial RO Systems |
Share
