HCTI
Replaces TW30HP-2526 DuPont FilmTec 500 GPD at 150 PSI 2.5 x 26 inch 99.4% Rejection Membranes
Couldn't load pickup availability
- FREE SHIPPING to The Contiguous United States! (Excluding Alaska & Hawaii)
- Hydrocomponent's membranes are equivalent to all major U.S. brands!
- Found a Better Price? Contact Us, We'll See if We Can Get You a Better Deal!
- MADE IN THE UNITED STATES!
- 1 Year Manufacturer's Warranty!
- IN STOCK & SHIPS FAST from The United States!
- For Quantity Discounts Contact Us for a Quote!
- Customers Outside The Contiguous United States, Please Contact Us for a Quote!
- For Private Labeling Contact Us for a Quote!
- Call: 1 (760) 598-0189
- Email: hctivista@gmail.com
Low-Pressure 2526 Replacement for the FilmTec TW30HP-2526
This 2.5-inch by 26-inch low-pressure reverse osmosis element from HCTI is a replacement for the FilmTec TW30HP-2526. It matches the following TW30HP-2526 dimensions and ratings: 2.5-inch by 26-inch format, a 6 GPM maximum feed flow, and a 113°F maximum operating temperature.
The element is rated at 500 GPD with a nominal salt rejection of 99.4% and a 98.0% minimum at a test pressure of 150 PSI. Flow and rejection are rated at 1,500 ppm NaCl, 77°F, pH 7.5, and 15% recovery, and individual elements can vary by up to 15% in flow. It is a thin-film composite polyamide membrane with a tape overwrap, a 2.4-inch outer diameter, and a 0.75-inch permeate tube. It fits a 2.45- to 2.5-inch ID housing or pressure vessel.
It tolerates operating pressure up to 300 PSI. The continuous pH range is 2 to 11, with cleaning allowed from pH 1 to 12 for up to 30 minutes. Feed water should stay under 1 NTU turbidity and SDI 5, with free chlorine below 0.1 ppm. According to HCTI's data sheet, all materials are NSF and/or FDA approved, with the exception of the outer wrap and its adhesive. If you are replacing a TW30HP-2526 in an existing 2.5-inch by 26-inch housing, confirm your system runs at or below the 300 PSI limit.
Specification Table
|
SPECIFICATION |
DETAILS |
|
Replacement For |
FilmTec TW30HP-2526 (2.5" x 26" RO Element) |
|
Manufacturer |
HCTI (Hydrocomponents & Technologies Inc.) |
|
Membrane Type |
Thin-Film Composite Polyamide, Low Pressure RO |
|
Element Dimensions |
2.4" Diameter x 26" Length |
|
Housing Fit |
2.45" – 2.5" ID Housing or Pressure Vessel |
|
Permeate Tube |
0.75" |
|
Outer Wrap |
Tape Overwrap |
|
Permeate Flow Rate |
500 GPD |
|
Nominal Salt Rejection |
99.4% |
|
Minimum Salt Rejection |
98.0% |
|
Test Conditions |
1,500 ppm NaCl, 150 psi (10.3 bar), 77°F (25°C), pH 7.5, 15% Recovery |
|
Permeate Flow Variation |
± 15% |
|
Max Operating Pressure |
300 psi (20.7 bar) |
|
Max Feed Flow |
6 GPM (1.4 m³/h) |
|
Max Operating Temperature |
113°F (45°C) |
|
pH Range (Continuous) |
2 – 11 |
|
pH Range (Cleaning, 30 min) |
1 – 12 |
|
Max Feed Water Turbidity |
1 NTU |
|
Max Feed Water SDI |
SDI 5 |
|
Free Chlorine Tolerance |
< 0.1 ppm |
|
Materials |
NSF and/or FDA Approved, Except Outer Wrap and Adhesive |
Non-OEM Compatibility: This product is a high-quality, non-OEM compatible replacement membrane designed to function as an alternative to original manufacturer components. While engineered for direct fit and functional compatibility, specific performance metrics and technical specifications—including, but not limited to, permeate flow rate (GPD), operating pressure (PSI), and salt rejection percentages—may vary from the exact specifications of the original OEM target model. It is the customer's sole responsibility to cross-reference these specifications with the original part to ensure the replacement meets their specific operating requirements prior to purchase and installation. All brand names, part numbers, and logos are the property of their respective owners and are used solely for identification and cross-reference purposes. This product is not affiliated with, endorsed by, or sponsored by any original equipment manufacturer.
Share
